Metal braces

If you’re considering starting orthodontic care, schedule a consultation at Dynasty Stomatology dental clinic in Czech Republic. Our orthodontist will conduct a thorough examination, assess your case, and suggest the most suitable brace system tailored to your individual needs.

How Metal Braces Work

Metal braces consist of small brackets that are glued to each tooth and connected by a metal archwire. This wire exerts continuous pressure on the teeth, gradually moving them into their proper physiological position.

The orthodontist regularly adjusts the tension of the arch, directing the movement of the teeth and correcting the bite. Thanks to the strength of metal bracket systems, this method is effective even in severe cases of dental misalignment. The result is achieved gradually during the treatment time, and becomes stable upon completing the course of orthodontic treatment.

Advantages and Disadvantages of Metal Bracket Systems

The installation of metal braces remains a classic and highly effective method for bite correction due to its affordability and reliability. However, this brace system has both advantages and disadvantages:

Advantages of metal braces:

• High durability and strength;

• Effective even in complex orthodontic cases;

• Quicker results compared to other types of braces (e.g., ceramic or sapphire);

• Affordable cost;

• Suitable for patients of all ages.

Disadvantages of metal braces:

• Visible on the teeth, which may cause aesthetic concerns;

• May irritate or rub against oral tissues in the first few days;

• Require strict oral hygiene maintenance;

• Involve dietary restrictions (avoid hard and sticky foods).

Indications for Installation

Metal braces are widely used in orthodontics due to their versatility. They are suitable for correcting both minor and severe bite pathologies in children, teenagers, and adults. This orthodontic appliance is especially effective since braces exert constant pressure on the teeth, gradually moving them into the correct position.

Using a metal brace system, you can correct a range of dental issues, including:

• Tooth crowding;

• Diastemas and spacing between teeth;

• Deep bite;

• Open bite;

• Crossbite;

• Distal and mesial bite;

• Jaw asymmetry;

• Abnormal tooth positioning (rotation, tilt, or impaction).

When Metal Braces Should Not Be Installed: Contraindications

Despite their high effectiveness, metal braces are not suitable for everyone. There are absolute and relative contraindications that must be considered before installation.

Absolute contraindications:

• Severe periodontitis;

• Ongoing cancer treatment;

• Serious mental disorders;

• Metal allergies (e.g., to nickel);

• Systemic connective tissue diseases.

Relative contraindications (require preliminary treatment and monitoring):

• Caries and oral inflammations;

• Poor oral hygiene;

• Malocclusions requiring surgical correction;

• Pregnancy (especially in the 1st and 3rd trimester);

• Chronic somatic diseases during exacerbation.

Before installing the brace system, the dentist at our dental clinic performs a detailed diagnostic examination. This ensures patient safety, helps individually select the right treatment plan, and supports effective alignment for a beautiful smile.

Types of Metal Braces

Modern metal braces vary in design, attachment method, and functionality. The choice depends on the clinical case, budget, and the patient’s personal preferences. The main types of metal orthodontic systems include.

At Dynasty Stomatology, patients can choose from ligature, self-ligating, and lingual braces. Our orthodontists will help select the optimal option based on diagnostic results and individual bite features.

Stages of Metal Braces Installation

The process of installing metal braces involves several stages, starting with a comprehensive diagnostic assessment and ending with the activation of the system to correct the position of the teeth. All procedures are performed with the use of modern equipment and take into account the patient’s jaw anatomy. The treatment is entirely painless.

Here are the key steps in orthodontic treatment with metal braces at our dental clinic:

1. Initial consultation and treatment planning. An orthodontist or gnathologist performs a full assessment of the dentition, including X-rays and 3D scans, to develop a personalized treatment strategy.

2. Professional cleaning. Prior to installation, a hygienic cleaning is performed to remove plaque and tartar, and to polish the enamel surface.

3. Treatment of dental defects. Any defects such as caries must be addressed before braces are installed. Braces are only fixed on healthy teeth.

4. Bracket placement. Brackets are fixed to the vestibular (outer) surface of the teeth using high-quality dental adhesive.

5. Arc insertion and fixation. A corrective arc is threaded through the brackets. In ligature systems, it is held in place by elastic ligatures or metal wires. This arc gradually exerts pressure on the teeth to move them into a new position.

6. Care instructions and follow-up visits. After installation, patients receive personalized recommendations on oral hygiene (including floss usage) and a schedule for regular visits to adjust the system.

7. Retention phase. Once the braces are removed, a retainer (either fixed or removable) is provided to help patients maintain their perfect smile and prevent the teeth from shifting back.

Side Effects After Metal Braces Installation

Following the placement of metal braces made of stainless steel or titanium, some temporary side effects may occur:

1. Discomfort and pain. Mild soreness is common during the first few days after installation, especially when pressure is applied to the teeth.

2. Irritation of the mucosa. Metal parts can rub against the cheeks and lips, causing minor irritation.

3. Speech difficulties. The new structure in the mouth might slightly affect pronunciation during the adaptation period.

4. Increased tooth sensitivity. Teeth may become more sensitive to hot or cold stimuli after bite adjustments.

5. Plaque and tartar. Maintaining proper hygiene is essential to prevent the build-up of plaque and the formation of tartar.

Despite these side effects, modern orthodontic technology and high-quality materials like stainless steel or titanium allow you to correct various dental issues efficiently and safely. In the end, the transformation leads to a noticeably improved appearance and better oral health.

Caring for Metal Braces

Proper care for metal braces is essential to avoid complications and speed up the process of bite correction. During the treatment period, it’s important to follow these key recommendations:

1. Thorough teeth cleaning. After each meal, carefully brush your teeth and braces to prevent food particles and plaque buildup. Use a soft-bristled toothbrush and a special interdental brush designed for braces.

2. Regular dental appointments. Visit your dentistry specialist according to the scheduled appointments to monitor the condition of the braces, make adjustments, and receive professional cleaning.

3. Be mindful of your diet. Avoid hard or sticky foods that may damage the braces or cause them to loosen. Chewing on such items can compromise the system’s integrity.

If you’re undergoing treatment with self-ligating braces, maintenance becomes easier — they don’t require rubber bands or elastic ligatures, reducing the risk of breakage and making oral hygiene more manageable.

Cost of Metal Braces

The price of installing metal braces at our dental clinic depends on the complexity of your individual case, the chosen type of braces, and the duration of treatment. For an accurate cost estimate and a personalized treatment plan, schedule a consultation with a specialist at Dynasty Stomatology.

We use only high quality materials and modern equipment to ensure safe and effective results.